Operation Manual

Using Added Features to Make Efficient Phone Calls
33
Locking Your Phone
You need to leave your desk and want to ensure that no-one can alter your phone's settings, look at your
private data, or make outside calls from your phone.
You can lock your phone with a 2 to 10 digit code, see "Changing the code". The factory code setting is
0000.
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display shows "Terminal".
Terminal Press the "Terminal" Foxkey.
v Press the "v" Foxkey repeatedly until the display shows "Lock".
OK Press the "OK" Foxkey.
Use the digit keys to enter the code.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
v Press the "v" Foxkey repeatedly until the type of locking you want appears
on the display.
OK Press the "OK" Foxkey.
The display shows "Executed".
Note
You can lock either the configuration only ("Cfg.locked") or the entire
phone ("Locked"). With "barred" your private data cannot be viewed and
external calls from your phone are only allowed as per system settings.
☛