Operation Manual

Using Added Features to Make Efficient Phone Calls

Suppressing your Call Number from Your Called Party's

Terminal Display

You do not want your call number to appear on the terminal display of a called party in the public

network.

You have two possibilities [B]:

• If you never want your call number to appear, you can ask your system administrator to set up the

system configuration accordingly.

• To suppress your call number display for certain calls only, select the function "CLIR per call" before

dialling your party's call number. You can store the function under a function key or activate it with a

*/# procedure.

The CLIR per call function is available on a function key.

Tracing Malicious Calls

Your are being threatened or molested by a call. You want to identify the caller.

Using the MCID function (Malicious Call Identification) the provider records the following call data [D]:

• Your phone number

• The caller's phone number

• The date and time of the call

MCID has to be enabled by your provider. Your provider will inform you about accessing the recorded call

data.

Before the call: Press the CLIR per call function key.

Note

Suppressing your phone number from the display only works with external

calls and has to be subscribed to with your provider.

Note

MCID has to be stored under a Foxkey.

During a call: Press the Foxkey for MCID.

– or –

After the call do not hang up: press the function key for MCID while you hear

the busy tone.