Operation Manual

Personalizing Your Phone

Clearing a Key

You want to clear the assignment made to a configurable key.

The function "Delete key" is available for this purpose in the configuration mode.

Note

Besides the predefined functions you can also define your own function.

For more information, please refer to the section "Formulating Functions".

OK Press the "OK" Foxkey.

The function is stored under the key. Phone in idle state.

<long> To clear a function directly on the Foxkey: Press the Foxkey in the idle state

and hold it down for a moment.

Display reads "Number" or "Function".

– or –

To clear a function stored under the Foxkey using the hotkey: Press the

hotkey.

The display shows "Hotkey 1" and "Hotkey 2"

Press the hotkey repeatedly until the display shows the hotkey you want.

Note

You can also scroll through the hotkeys with the Menu key.

Note

From here on, the operating sequence is the same as for: Clearing functions

stored directly under the Foxkey and clearing functions stored under the

Foxkey via a hotkey.

v Press the "v" Foxkey repeatedly until the display shows "Clear".

OK Press the "OK" Foxkey.

The key configuration is cleared.