User's Manual

Procedures
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-29
Configuring the Aastra CNX
Conference configuration
Use the following procedure to configure the conference specifications for your
Aastra CNX.
Step Action
1 While logged into the Aastra CNX, click the Configure CNX tab.
2 Double-click the Conference object to expand the conference folder.
Conference/General
3 Under the Conference object, click “General”.
Result: The general conference attributes display.
4 Configure the attributes as required.
Attribute Default Valid Values/Description
Pin Length 5 Range: 3 to 8
Description: Number of digits in the passcode used for the
conference.
Leeway 5 Range: 5 to 10
Description: Period of time, in minutes, when callers can
access a conference before it starts.
Warning Time 5 MINUTES Range:5 MINUTES
OFF
Description: Determines whether or not a warning
message is played five minutes before the conference
ends.