User's Manual

Procedures
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-35
Configuring the Aastra CNX
6 Configure the attributes as required.
Step Action
Attribute Default Valid Values/Description
H.323 service DISABLE ENABLE
DISABLE
Description: Enables or disables the H.323 protocol
on the Aastra CNX. H.323 is an international standard
protocol for multimedia communication over
packet-switched networks, including LANs, WANs,
and the Internet.
H.323 Identification
Note: Enabled only if
H.323 service is set to
ENABLE.
CNX Description: The equipment that has H.323 enabled
in the network.
Bind Address
Note: Enabled only if
H.323 service is set to
ENABLE.
ETHERNET
INTERFACE 1
ETHERNET INTERFACE 1
ETHERNET INTERFACE 2
Description: Specifies the interface on the Aastra
CNX that is being used to gain access to the H.323
gatekeeper.
Gatekeeper
Registration
Note: Enabled only if
H.323 service is set to
ENABLE.
DISABLE ENABLE
DISABLE
DISCOVER
Description: Enables or disables the Aastra CNX to
locate the H.323 Gatekeeper. If set to DISCOVER,
the Aastra CNX searches until it discovers the
Gatekeeper when specifying by IP address or
hostname.
Note: When using H.323, the Aastra CNX functions
as a terminal appearing as a peer to H.323-based IP
phones. You can configure the Aastra CNX to work
with one or more H.323 gatekeepers.