Administrator Guides EN Owner's manual

User Session Log
7-14 41-001391-00 Rev 03 – 04.2012
If USL logging and viewing have been enabled (refer to USL Configuration on page 7-12), the USL Report page will dis-
play a listing of USL data.The data for each log entry contains the following data types:
Session-ID:
A unique identifier (index) for the logged session.
Correlation-ID:
Used for correlating a session to a call.
From:
Identifies the calling user (URI, phone number, alias).
From-terminal:
The IP address of the calling terminal.
To:
Identifies the called user (URI, phone number, alias). For multi-party calls the text sip:vhost@ identifies the terminal
of the BluStar 8000i conference initiator.
To-terminal:
The IP address of the called terminal. For multi-party calls the text sip:vhost@ identifies the terminal of the BluStar
8000i conference initiator.
Setup-start:
The date and time that the session setup was initiated.
Session-start:
The date and time that the session was established.
Session-end
The date and time that the session ended.
Setup-duration:
The length of time between Setup-start and Session-start.
Duration:
The length of time between Session-start and Session-end.
Bandwidth-tx:
The total bandwidth (audio and video) sent from the calling terminal during the session.
Bandwidth-rx
The total bandwidth (audio and video) received by the called terminal during the session.