Administrator Guides EN Owner's manual

Version Info
8-21 41-001391-00 Rev 03 – 04.2012
Version Info
The Version Info page displays BluStar Application Server Version Information, including the release, build number,
the distribution that included the software, and detailed package information.
Network Routing
The Network Routing page allows the addition of static routes to other networks. Static routes take precedence over
routes defined by dynamic protocols. Defining a static route ensures that when the Application Server attempts to reach
a device with an IP address on a network defined under static routes, the specified gateway will be used instead of the
default gateway.
Default Gateway
This may be edited by accessing the Platform :: System Settings page.
Interface
Lists the available network interface cards that were configured in vconfig.
Network Address
The address of the network you would like to reach.
Netmask
Used to inform routers as to how much of an IP address identifies the subnetwork the host is on and how much
identifies the host. Example: 255.255.255.0
Gateway IP
The gateway that should be used when trying to reach the specified network.
Press the Save button to make the static route(s) active.