Administrator Guides EN Owner's manual

SBC Solution Configuration
41-001391-00 Rev 03 – 04.2012 12-11
g) On the BAS Web UI, go to the BluStar Devices :: BluStar Device Status page. Select the BluStar terminal device
that will be used outside the corporate firewall.
Include the following settings in the Other Settings section under Own. The registration parameters are used for
SIP registration.
– Outbound Proxy=SBC external IP address
Note:
Don't forget to configure the SBC in the Static URL for the user below (in step h).
– Proxy=server1.aastra.com
– Registrar=server1.aastra.com
– UserName=username
– AuthName=authname
– Password=password
– DisplayName=displayname
Note:
Comment out the following lines if you want to use the BluStar terminal in a LAN/VPN environment, instead of out-
side the SBC.
– SIP_UseSBCInVASMode=1
– Cert_ignore_ip_mismatch=1
– SIP_TLS=0
h) On the BAS Web UI, go to the Users :: User Accounts page. Select the BluStar user that will be logging in from
outside the corporate firewall. In the User Details section, select the Security tab and enter “SBC” in the SIP Static
URL field.
4. BluStar terminal configuration:
a) On the BluStar terminal, go to app menu > tools > terminal identity screen and enter in the hostname (e.g.
server1.aastra.com) in the BluStar Application Server field.
Note:
Using the IP address will cause the SBC traversal to fail.
b) Go to app menu > log off, then select log off and restart to restart the terminal.