Administrator Guides EN Owner's manual

Software Installation and Network Configuration
2-9 41-001391-00 Rev 03 – 04.2012
Time Setup
1. On the BluStar Application Server Configuration menu, use the up and down arrow keys to select Time Setup, then
press Enter. The following screen displays:
2. Press the spacebar to toggle the hardware clock setting.
Note:
Setting the hardware clock to GMT is recommended.
3. Press the Tab key to move to the list of time zones; then use the up and down arrow keys to select the desired time zone.
4. Press the Tab key to move to the Ok button; and press Enter or the spacebar to accept the time zone settings.
The following screen displays: