Administrator Guides EN Owner's manual

Software Installation and Network Configuration
2-13 41-001391-00 Rev 03 – 04.2012
Installing the BluStar Application Server Software
Once initial configuration is completed (refer to Initial System Configuration on page 2-16), the Application Server is
ready for installation of the BluStar Application Server software.
1. On the BluStar Application Server Configuration menu, use the up and down arrow keys to select Software Installation,
then press Enter.
2. You are asked to confirm that you want to continue with the software installation. Select Ye s , then press Enter to
continue.
3. The End-User Software License text displays similar to the following:
4. Please read the text, using the spacebar, arrow keys, etc., as needed to view the information. When finished, press Enter.