Administrator Guides EN Owner's manual

BluStar Device Status
6-3 41-001391-00 Rev 03 – 04.2012
Force reboot time
Reboot device at specified time. Format is yyyy-mm-dd hh:mm:ss (for ASAP use current date and time).
Terminal Security Settings
Disable dialing when logged off
Specify whether or not to disable dialing when no user is logged in to the terminal. Disabling dialing will cause the
terminal to not display the dial pad.
Allow change of auto answer setting
Specify whether or not to allow users to change auto answer settings
Allow automatic presence changing
Specify whether or not to allow automatic presence changing. The BluStar 8000i can automatically adjust user’s
presence based on whether users are logged in (presence set to Available), logged out (presence set to Unavaila-
ble), or in a call (presence set to Busy). This setting controls whether presence will be automatically changed this
way. Presence is never automatically changed if it has been manually set to a value other than Available, Unavaila-
ble, or Busy.
Enable FIPS 140-2 Strict Security Mode
Not supported on BluStar terminals.
Screen lock on inactivity after
Can be set to disabled or a specified number of minutes. The screen lock facility can lock a BluStar 8000i terminal,
requiring the currently logged in user’s password to be re-entered before the terminal can be used again.
Disable remote camera control
Not supported on BluStar terminals.
Disable terminal services client
Not supported on BluStar terminals.
Require password to edit terminal identity
Enable or disable password protection for terminal identity changes.
Password to edit terminal identity
Specify password to edit terminal identity.
Allow XML remote control
Enable or disable XML remote control.
Screen Dimming Settings
Screen first dim time
Can be set to disabled or to a specified number of minutes. The screen partially dims after this number of minutes.
Screen second dim time
Can be set to disabled or a specified number of minutes. The screen further dims after this number of minutes.
Screen saver settings
Screen save time
Can be set to disabled or a specified number of minutes.