Administrator Guides EN Owner's manual

BluStar Device Status
41-001391-00 Rev 03 – 04.2012 6-4
Locale Settings
Time zone
Specify the time zone by selecting an appropriate value from the list. Set the time zone globally if it is the same for all
terminals. Otherwise select the appropriate time zone for each terminal.
Language
Specify the language to be used on the terminal user interface.
DiffServ or IP Type of Service Settings
IP TOS byte for audio
Specify the IP Type of Service (TOS) byte which should be used for audio packets in this field. Leaving the field empty
in per-device settings will instruct a device to use the globally specified parameter.
IP TOS byte for video
Specify the IP Type of Service (TOS) byte which should be used for video packets in this field. Leaving the field empty
in per-device settings will instruct a device to use the globally specified parameter.
IP TOS byte for low-res video
Specify the IP Type of Service (TOS) byte which should be used for low resolution video packets in this field. Leaving
the field empty in per-device settings will instruct a device to use the globally specified parameter.
LDAP Settings
LDAP server display name
The name to be displayed of the LDAP (Lightweight Directory Access Protocol) server
LDAP server hostname or IP address
The IP or hostname of the LDAP server. This will typically be the organization’s main LDAP server, which contains the
organization’s main directory (global address book). Users can add additional LDAP servers as desired. This parame-
ter handles multiple values, the format is the following username:password@ldapserver:port
Where:
– username for Authentication (optional, if not provided anonymous connection will be used)
– password for Authentication (optional)
– ldapserver is the IP address or name of the LDAP server (mandatory)
– port is the LDAP interface port (optional, default is 389)
Example 1: LDAP_Server=ldap.acme.com, no authentication and using default port 389
Example 2: LDAP_Server=user:[e-mail]:3268, authentication and using port 3268
LDAP server base DN
The description of the top level of the directory tree. Usually if a company domain is company.com, the base DN (Dis-
tinguished name) must be entered under the form “dc=company, dc=com”. For example, LDAP_BASE_DN=dc=acme,
dc=com for acme.com
LDAP server authentication
If authentication is set to “Y”, the username/password used for the LDAP authentication is the BluStar login user-
name/password, overriding any authentication parameter set in the Server parameter. If it is set to “N”, the user-
name/password, embedded in the Server parameter will be used.