Administrator Guides EN Owner's manual

BluStar Device Status
41-001391-00 Rev 03 – 04.2012 6-6
LDAP home postal code attribute list Specifies the LDAP home postal code (e.g. 75034) for the attribute list. If this parameter contains more than one
value, only the first matching value will be selected in the record.
For example, Setting_LDAP home postal code attribute list=hcode
LDAP home country attribute list Specifies the LDAP home country (e.g. U.S.A) for the attribute list. If this parameter contains more than one
value, only the first matching value will be selected in the record.
For example, Setting_LDAP home country attribute list=hcountry
LDAP business phone 1 attribute list Specifies the LDAP business phone 1 (e.g. 1-905-760-4200) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP business phone 1 attribute list=wphone1
LDAP business phone 2 attribute list Specifies the LDAP business phone 2 (e.g. 1-905-760-4201) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP business phone 2 attribute list=wphone2
LDAP home phone 1 attribute list Specifies the LDAP home phone 1 (e.g. 1-416-468-3266) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP home phone 1 attribute list=hphone1
LDAP home phone 2 attribute list Specifies the LDAP home phone 2 (e.g. 1-416-468-3267) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP home phone 2 attribute list=hphone2
LDAP mobile phone attribute list Specifies the LDAP mobile phone (e.g. 1-416-468-3268) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP mobile phone attribute list=cell
LDAP other phone attribute list Specifies the LDAP other phone (e.g. 1-416-468-3269) for the attribute list. If this parameter contains more than
one value, only the first matching value will be selected in the record.
For example, Setting_LDAP other phone attribute list=otherphone
LDAP business fax attribute list Specifies the LDAP business fax (e.g. 1-905-760-4233) for the attribute list. If this parameter contains more than
one value, only the first matching value will be selected in the record.
For example, Setting_LDAP business fax attribute list=fax
LDAP email 1 attribute list Specifies the LDAP email 1 (e.g. [e-mail]) for the attribute list. If this parameter contains more than
one value, only the first matching value will be selected in the record.
For example, Setting_LDAP email 1 attribute list=email1
LDAP email 2 attribute list Specifies the LDAP email 2(e.g. [e-mail]) for the attribute list. If this parameter contains more than
one value, only the first matching value will be selected in the record.
For example, Setting_LDAP email 2 attribute list=email2
LDAP email 3 attribute list Specifies the LDAP email 3 (e.g. [e-mail]) for the attribute list. If this parameter contains more than
one value, only the first matching value will be selected in the record.
For example, Setting_LDAP email 3 attribute list=email3
LDAP web address attribute list Specifies the LDAP web address (e.g. www.aastra.com) for the attribute list. If this parameter contains more
than one value, only the first matching value will be selected in the record.
For example, Setting_LDAP web address attribute list=web
LDAP cn attribute Used when both the first and last name of a record are empty.
For example, Setting_LDAP cn attribute=display
LDAP dn attribute Used to perform the search request for the detailed view of an LDAP contact.
For example, Setting_LDAP dn attribute=customDN
LDAP search filter Used to set search filters. This parameter format must follow RFC 4515, for example (sn=%). This parameter
must include a '%' character at the place where it will be replaced by a*, b*, etc...
For example, Setting_LDAP search filter=(&(sn=%)(number=*))
LDAP search scope Used to set the search scope. A "base" search is performed only on the baseDN, a "onelevel" search is per-
formed on the baseDN and the first sublevel, and a "subtree" search is performed on the whole tree under the
base DN.
For example, Setting_LDAP search scope=onelevel
LDAP search timeout Used to set the request timeout for LDAP requests. A range of 1 to 120 is applicable.
For example, Setting_LDAP search timeout=30
Parameter Description