Administrator Guides EN Owner's manual

BluStar Device Status

6-7 41-001391-00 Rev 03 – 04.2012

To enter advanced parameters, log in to the BAS Web UI and navigate to the BluStar Devices :: BluStar Device Status

page. Select the applicable BluStar terminal device and enter the appropriate parameters in the Other Settings section

under the Own field.

Specify pre- and post-login banner text.

Miscellaneous BluStar Terminal Settings

Maximum Video Bandwidth Limit

This setting limits the video bandwidth for the terminal to the selected value (either 6000, 5000, 1500, 768, 384, or

128 kilobits per second).

Enable H264 VBR Mode

Enables or diables H.264 Variable Bit Rate (VBR) mode.

Maximum videoShare Bandwidth Limit

This setting limits the videoShare bandwidth for the terminal to the selected value (either 3000, 1500, 768, 384, 128

kilobits per second).

Maximum Thumbnail Video Bandwidth Limit

This setting limits the thumbnail video bandwidth for the terminal to the selected value (either 256, 128, 64, 16, 8

kilobits per second).

Preferred Audio Bandwidth Limit

Specifies the maximum audio bandwidth limit.

Maximum Collaboration docShare (Image) Bandwidth Limit

This setting limits the bandwidth for docShare images sent by the terminal to the selected value ( either 4000,

2000, 1000, or 500 kilobits per second).

Display Mouse Cursor

Displays the mouse cursor.

LDAP network timeout Used to set the network timeout for LDAP requests. A range of 1 to 120 is applicable.

For example, Setting_LDAP network timeout=50

LDAP initial download delay Used to set the LDAP initial download delay. Setting a value of 0 does not introduce any delay and the initial

download is performed synchronously during the login process. With all other values, the download is per-

formed asynchronously, delayed by the value amount (in seconds) after the login process. A range of 0 to 120

is applicable.

For example, Setting_LDAP initial download delay=60

Parameter Description