Administrator Guides EN Owner's manual

Download Software
41-001391-00 Rev 03 – 04.2012 6-18
Adding Software to the Server
To add terminal software to the server:
1. Click Add. The following page appears:
1. Type in the file name.
Note:
The file type must be either a .rpm or .tar.
2. Type in the FTP server (e.g., “generic.hostname.com” or “100.200.1.2/ftppath”), user name, and password (if applicable).
3. Click Save.
You will see the following page appear.
4. Click Refresh to update the download status.
If the file name and FTP server credentials are correct, you will see the status go from Waiting to Download > File
Downloading > Download Complete.
If there is an error with the file name or the FTP server credentials, an error message will appear under the Download
Status.
5. Once the download is complete, select the terminal software build and click Install Software.
You will see the following message: “Are you sure you want to install the selected software files?”
6. Click Install Software again.
Your page no longer shows the software build