User guide

Outgoing Calls
Dialog 4106 Basic/Dialog 4147 Medium26
Program
How to program a directory number on the programmable keys.
On the Dialog 4106 Basic phone:
The Dialog 4106 has four keys for programming; the three
programmable keys and the Message key.
Note: To store a number on the Message key, just press
the key during the following procedure like a normal
programmable key.
u Lift the handset.
Wait for dial tone.
¥ Press.
î Press a programmable key.
If a number is already stored, it will be erased automatically.
If you would like to erase a number, store a 0 instead of the
telephone number.
z
Dial the number.
You can use any directory number, e.g. a Common Abbreviated
Number or a colleague’s extension number. You can also store a
pause (multiple pauses possible), the R-key function or any code
that contains
* or #. To store a number that incorporates a wait
for a new dial tone, see section “Wait for dial tone” on page 17.
¥ Press.
d Replace the handset.
Notes:
You can write the names above the keys on the self-
adhesive label. Because of the special label material, you
can also erase and re-write any key name.
If you press an invalid key during programming, the
programming mode will be terminated automatically and
you will hear a special rejection tone.