User guide

Installation
DT292100
Battery
The Cordless phone is powered by a rechargeable battery. You can
fully charge an empty battery by placing the Cordless phone in the
charger for 4 hours. A fully charged battery gives you up to 17
hours calling time or up to 140 hours standby time.
Note: The calling time and standby time is shortened if the
hands-free speaking function is used a lot.
The Cordless phone has a battery meter, which indicates the
power remaining in the battery.
Note: The Cordless phone is powered by a Nickel Metal
Hydride (NiMH) battery. It can be recharged at any time. To
keep the battery fully charged, you can put or leave the
Cordless phone in the charger without any problem.
Reading the battery meter
When the battery is fully charged, the battery meter on the
Cordless phone display consists of four blocks. The number of
blocks decreases as the battery discharges. If the battery is almost
empty, the battery meter and the red light on the Cordless phone
flash. An alarm sounds if there is less than 15 minutes calling time
remaining in the battery.
Battery performance
The table below indicates the performance:
Tal k time
(hours)
Standby time
(hours)
Charge time
(minutes)
High capacity
battery: 17 140 240