User`s guide

Supplementary features
28
eud-0850/2.1 — I7.7 — 10.2008
■ To answer the callback request
Someone has asked you to call back. You can tell this from the lit attention LED in the idle state.
The display reads Call back requested.
■ Call Waiting on an internal user
You want to talk to an internal user. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone number or
name appears on his display. The person can either answer or reject your call.
Requirement: It is essential that the internal user has not barred the Call waiting function on his
phone (for configuration see the Chapter "Do not disturb/Call waiting/Intrusion/Announce-
ment/Forward", page 66).
Ask your system administrator whether the Call waiting function is enabled on the system.
Call
To answer the callback request:
Press Foxmenu > Foxkey Call.
➯ The phone number is dialled.
Delete
Clear callback:
Press Foxmenu > Foxkey Delete.
➯ Callback is deleted.
Note:
The call back can be changed via Menu > Activated features >FoxkeyDelete or
Answer as long as it was not answered or cancelled by the system.
Call waiting
User is busy:
Press Foxmenu > Foxkey Call waiting.
➯ You hear the dialling tone.
Note:
If the person rejects your call request or if call waiting is not possible, the call is,
depending on the system’s configuration, disconnected (busy tone) - or for-
warded to a preconfigured destination .