User`s guide

Personalizing Your Phone

eud-0850/2.1 — I7.7 — 10.2008

■ To activate headset operation

You have connected a headset and now want to activate the headset mode.

A headset can be connected in parallel with the handset. You can switch the headset mode on

and off.

If you answer a call in headset mode using the Call key or Loudspeaker key, the call is provided

on the headset. Alternatively you can also answer the call by picking up the handset.

This phone supports wireless headsets based on the DHSG standard, which allows you to set up

and to end calls from the headset. Ask your dealer which headsets are particularly well suited

for this phone.

When you connect a Bluetooth® headset (see chapter "Activate Bluetooth® operation and Blue-

tooth® device (Aastra 5380 only)", page 60), the headset is automatically activated.

■ Activate Bluetooth® operation and Bluetooth® device (Aastra 5380 only)

You want to make a call using a Bluetooth®-supported headset or to set up a conference using a

Bluetooth®-supported conference unit. Contact your system administrator to install a Blue-

tooth® module.

As soon as you have connected a Bluetooth® module to your terminal, you can activate the

Bluetooth® operation and connect Bluetooth® devices.

Note:

To find out how to make phone calls with the headset, refer to the Chapter "Using a Headset", page 13.

Press the Menu Foxkey.

Settings

Scroll to Settings and press the Select Foxkey.

Audio

Scroll to Audio and press the Select Foxkey.

Headset

Scroll to Headset and press the Modify Foxkey.

Activate/deactivate the headset mode and confirm with the Ok Foxkey.

➯ The microphone is now deactivated, is displayed.

Note:

Always disconnect the phone from the mains first before you install a Bluetooth® module.