User`s guide

Operator Console
81
eud-0850/2.1 — I7.7 — 10.2008
Setting the operator console
You can configure up to 10 line keys on level 1 of an Aastra M535.
■ Adding and setting operator lines
You can make a number of settings that affect the telephone's response when someone calls on
a Line key.
Note:
The settings are made once for all the Line keys.
Menu
Setting the operator console:
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
Operator
Scroll to Operator and press the Select Foxkey.
Company A/B
Depending on the configuration select Company A or Company B.
➯ The display shows the properties with which you can configure the line key.
<Setting value>
Select the required audio setting and confirm with the Ok Foxkey.
Setting possibilities for ringing:
• Off for no ringing tone, On for instant ringing tone, and ringing tone Del 10s,
Del 20s and Del 30s and confirm Ok with the Foxkey.
• Melody, andSpeed: You can listen to each setting using the Test Foxkey.
Setting possibilities for answering mode:
• Key to answer the call by pressing the line key, Handset to answer by picking
up the handset, and Hands-free to answer automatically with hands-free.
•Using Handset or Hands-free, you must also specify the Priority, with 1 being
the highest priority, and 8 the lowest. This setting is useful for the two-com-
pany systems.
Notes:
The Handset and Hands-free settings only work when the ringing signal is acti-
vated.
Setting possibilities for answering mode:
Key for making the call by pressing the Line key and Handset for making the call
by picking up the handset.
Setting possibilities for call list:
Insert for an entry in the call list and Do not insert for no entry.