User`s guide

Operator Console
88
eud-0850/2.1 — I7.7 — 10.2008
Properties of a two-company system:
• Each individual Line key allows you to appear as Company A or B.
• Call lists are not kept separately according to company.
• The call charges are recorded separately for each company.
• A substitution will apply equally to both companies.
■ Activating/Deactivating Functions by Remote Control
You are not at your desk and want to set various functions on your phone from a different
phone.
You can activate/deactivate many of your phone's functions by remote control from a different
phone. Remote control has to be enabled for your phone in the system.
The remote control is initiated using a special */# procedure. You can then enter the function
commands and */# procedures.
To phone on behalf of Company A:
Press a free Line key once.
➯ The Line key lights up. The line is selected.
To phone on behalf of Company B:
Press a free Line key twice.
➯ The Line key lights up. The line is selected.
Enter the phone number of the user.
➯ You will appear to the person either as Company A or B and transmit the
corresponding phone number.
Using remote control from a third-party phone:
1. Enter */# procedure #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the */# procedure for activating/deactivating the function you want.
Pick up the handset.
➯ You hear the acknowledgement tone.
Put the handset on-hook.
➯ The function is now activated/deactivated.
Note:
The factory setting "0000" is not accepted. First change the PIN as described in
chapter "Changing the PIN", page 63 or use */# procedure *47 (see “"User’s
Guide */# Procedures"”). If you have forgotten your PIN, your system adminis-
trator can reset it to the factory setting.