User`s guide

Supplementary features
39
eud-0850/2.0 — I7.6 — 08.2007
Organisation Within the Team
This section explains the different options provided by your phone to communicate in a team. To be
able to set up a Team key, you need to make sure an Office KBM or Office DKBM [a] expansion key
module is connected. Contact your system administrator for more information.
n
Using the Team Key
You and your team partners want to be reachable at all times as a team and be able to commu-
nicate with one another as quickly as possible.
By pressing a single key you can call a team partner or answer a call for anyone in the team.
When a team partner makes a call, the corresponding Team key lights up; this tells you when a
team partner is busy. The Team key flashes to indicate that the team partner is receiving a call.
If, for example, level 3 of the Office DKBM expansion key module is activated and the Team key
on level 1 receives a call, the call is signalled by the red blinking LED in position 1. For more
information about the Office DKBM expansion key module, please refer to chapter "Using the
expansion key module Office DKBM", page 15.
A red LED signals an external call; a green LED, an internal call.
n
Calling a Team Partner
You want to call a team partner as quickly as possible.
Requirement: You have configured a configurable key as a Team key and stored the team part-
ner's phone number under it (see Chapter "Configuring Keys", page 62).
<Barring>
Select the barring you want and press the Reset Foxkey.
Þ
You are prompted to enter your PIN.
<PIN>
Enter the PIN and confirm with the Ok Foxkey.
Unlocked
Scroll to Free and confirm Ok with the Foxkey.
Þ
The phone is unlocked.
Press the Team key for the team partner.
Þ
The phone number and possibly the name of the team partner appear on
the display. The team partner is called.
*
eud-0850_en.book Page 39 Monday, August 13, 2007 3:15 PM