User`s guide

Personalizing Your Phone

eud-0850/2.0 — I7.6 — 08.2007

Storing a Function under a Key – Function Key

You want to retrieve a frequently used function - for example "call forwarding on no reply" -

using a single keystroke rather than having to enter it by hand. Usually the function is assigned

so that you:

• activate the function with the first keystroke - LED lit,

• and deactivate the command again with a second keystroke - LED off.

If you have connected an Office KBM or Office DKBM expansion key module, the LED indicates

the key status:

• Red: Function is activated.

• Green: Function is deactivated.

<long>

To store a function under a configurable key:

Press the key and hold it down for a moment.

Display shows choice of key types.

Function key

Scroll to Function key and press the Select Foxkey.

The currently set function is displayed with .

Select the function you want and press the Select Foxkey.

The further prompting depends on the function (see Chapter "Supplemen-

tary features", page 20). Once you have made all the settings, the function

is stored under the key.

Note:

Besides the predefined functions you can also define your own function. For

more information please refer to the Chapter "Function Commands", page 70.

Storing a function under the Foxkey:

Press the Menu Foxkey.

Settings

Scroll to Settings and press the Select Foxkey.

Keys

Scroll to Keys and press the Select Foxkey.

Function key

Scroll to Function key and press the Select Foxkey.

The currently set function is displayed with .

eud-0850_en.book Page 65 Monday, August 13, 2007 3:15 PM