User guide

18 Venture 3-Line Telephone User Guide
Making and receiving calls
2. Wait for the tone to end.
3. Speak into the handset or
Handsfree microphone.
4. Hang up or press © to
end the page.
Paging one phone
1. Press ’ repeatedly until the
display shows the phone you
want to page. Hold down the
intercom key for two seconds.
OR
If you have saved that phone ID
to a memory key, hold down the
memory key for two seconds.
2. Wait for the tone to end.
3. Speak into the handset or the
Handsfree microphone.
4. Hang up or press ©
to
end the page.
To answer a page
When all phones in the system are
paged, you will hear two short tones
before the initiator begins speaking.
You can listen but you can not
respond.
When only your phone has been
paged, you will hear a tone at 15
second intervals until you pick up the
phone or press the Handsfree key. If
you have Handsfree answer turned
on (see Option “03 Hndfree ansr
”
on page 21), you can answer the page
by talking into the Handsfree
microphone without picking up your
handset.
Setting up a Room monitor
Room monitor is used to listen to the
sounds in a room such as an
unattended lobby, or a baby’s room.
To set up Room monitor on the
phone being monitored
1. Press Options.
2. Press ’ until the display shows,
07 Room monitor OFF .
3. Press
¥
. The display shows
Room monitor ON .
To set up Room monitor on the
monitoring phone
1. Press Options
2. Press ’ until the display shows,
08 Memory keys prog .
3. Press
¥
. The display shows,
Don t disturb .
4. Press ’ until the display shows,
Room monitor .
5. Press
¥
. The display shows,
Press memory key .
6. Press the memory key you want
to use. The display shows,
Saved: Memory key Room
Monitor .
To activate Room monitor
1. Go to the monitoring phone.