Technical data

Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
5.5. Unloading
• Start the procedure by securing the area for unloading. Move the dolly with the
stair robot into the desired position for unloading.
• Reverse the Robot of the dolly, fit the loading-ramp into position at the front of the
robot
• Slot the winch into the lifting platform at the rear of the stairrobot
• Pull the winch-hawser out and connect it with the load. Disconnect the load from
the lifting platform
• The load can now be lowered to floor level, one man operating the winch and one
man guiding the load of the ramp onto the floor. While lowering the load the lifting
platform will rise until the platform has reached the same gradient as the loading-
ramp
• If the load is on the floor the winch and loading ramp can be removed
• Al
l these techniques should be practised with a light load first
Page 19 of 28