AATA INTERNATIONAL B.V.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 Stairrobot Type number Serial number Year of construction Owner : SR 450 : : 2001 : Manufacturer: AATA International b.v Willem 2 straat 1e 6021 EA Budel The Netherlands Tel : 0031-(0) 495 518214 Fax : 0031-(0) 495 518515 e-mail: aata@aata.nl http:www.aata.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 Preface AATA International is an innovative and dynamical company, specialised in stair climbing equipment. Stairrobots are active in over 30 countries worldwide. This manual is written for machine operators and for technician who take care for the maintenance of the machine. Although the tiniest details are not set out, the manual is a useful help for people who are dealing with the machine on a daily basis.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 Table of contents Preface…………………………………………………………………………………………… Table of contents .……………………………………………………………………………… Survey of standards……………………………………...……………………………………… Survey of standards………………………………………………………………………...…… 3 4 5 5 1. Technical data…..………………..………………………………………………………… 6 2. Description main components stair robot SR 450 2.1 Drive………………………………………………………………………………… 2.2 Transmission and brake………………………………………………………….. 2.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 Survey of standard We declare that the construction of the stairrobot SR 450 is according to the provisions of EC-Directives 89/392/EWG.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 1. Technical data SR 450 Description Speed Maximum stair-climbing angle Weight Maximum load weight Colour Length Width Load length standard Load length handles extended Height platform Value Units 4 Metres p/minute max. 45 49 350 ~~ 1450 460 1220 1880 220 Charger (220V or110V/24V) with cooling ventilator Charging time with batteries º Degrees Kg. Kg. ~~ Mm Mm Mm Mm Mm 3 +/- 4 Amp.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 2 Description main components stairrobot SR 450 2.1. Drive • Minimal noise DC permanent magnet motor with built-on worm wheel reduction 2.2. Transmission and brake • Gearbox built directly onto the Worm wheel reduction of the drive motor • The worm-wheel reduction forms an affective brake for the (loaded) StairRobot on the staircase 2. 3.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 2.4.1 Battery indicator • Batteries 90 -100 % charged • Batteries 60 - 90 % charged • Batteries 30 – 60 % charged • Batteries almost empty When the red light is on do not discharge the batteries any further as this will result in damage to the batteries. If on a stairway; descent the machine and charge batteries. 2.5. Battery charger The charger comes with a 1,5 mtr cable to connect the charger with the stairrobot.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 3. Optional equipment 3.1. Dolly • The dolly is constructed of square steel fittings with four heavy-duty swivel wheels for easy movements. An extendable frame can be pulled out to increase stability while driving the StairRobot on the dolly.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 4. Safety 4.1. General safety precaution • • • • • It is not permitted to make alterations to the machine. Everybody who is working with the machine has to be acquainted with the safety rules and has to act upon them. Always check the surroundings for safety where the stair-robot will be deployed.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. • Publication: 10-05-01 Secure the working area using warning boards or blocking ribbon • • • • • • • • • • • • • • To avoid misuse by unauthorised persons, don’t leave the machine unattended. Within the path of the machine there may be no obstructions. Make sure the environment of the machine is dry, clean and illuminated sufficiently. With the machine in operation it is forbidden to be within the operation area of this apparatus.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 5 OPERATORS PROCEDURE 5.1. Adjusting frame • Unlock the extension frame handle and adjust the extension frame to the load dimensions; lock handle again 5.2. Unlocking and retracting folding wheel • To unlock the folding wheel; push lever towards handle.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 5.3.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 • • • Page 14 of 25 Position the load on the platform with the centre of gravity of the load towards the front (in positive area) Position the load with the centre of gravity of the load as low as possible to the lifting platform. The centre of gravity of the load should be within the positive area between the tracks.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 5.4.2. Loading procedure • Start the procedure by securing the area for loading. Move the stair robot into the desired position for loading. The stairrobot SR450 can be loaded by use of the following two techniques: 1.a • • Place the stairrobot flat on the ground close to the load Lift the load on the platform 1.b • Secure the load on the platform • Lift the stairrobot and drop the folding wheel by pushing the lever 1.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 2.a • • • Move the stairrobot in front of the load Upend the stairrobot and shove the rear-end of the platform under the load Secure the load on the platform • Drop the folding wheel by pushing the lever • Place one foot on the folding wheel and pull the stairrobot on it’s three wheels 2.b 2.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. 5.5.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 5.5.1. Landing 1.a 1.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. 1.c • • • 5.6.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. • • Publication: 10-05-01 Drive the stairrobot downstairs until the two fixed wheels hit the floor Use forward command on the control handle and balance the equipment into an up-end position 5.6.1.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. • Publication: 10-05-01 Place one foot on the folding wheel and pull the stairrobot on it’s three wheels 5.7.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 6 Trouble shooting chart The stairrobot SR 450 is designed and built to function for several years with little maintenance. In case a problem occurs please make the following checks.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 8. Parts list Art.nr.: 450.001 450.002 450.003 450.004 450.005 450.006 450.011 450.012 450.013 450.014 450.016 450.017 450.018 450.020 450.050 450.200 450.400 450.410 Article Main motor Gearbox Folding leg incl.
Manual Stair Robot SR 450 AATA INTERNATIONAL B.V. Publication: 10-05-01 9.
