Specifications

Starting with the software version 2.32, the A-Minima allows you to

set and recall the footage of four different magazines.Second on the

Control panel menu, press the DOWN arrow twice to access the

magazine A footage setting. Press again on the DOWN arrow if you

want to recall or set the mag B, C or D. The display showing the

desired mag ID and footage, pressing YES will allow you to vali-

date (press YES) or change the mag footage (UP or DOWN arrows

then YES)

Chapter 5 -

Accessories

To delete a specific speed added to the preset list

If you want to deleted it from your preset list, choose DELETE,

then press YES. The camera will default to 1.000 fps.

Magazine footage setting

Second on the list, press the DOWN key twice, press YES to access

the magazine footage setting. With a fully loaded magazine installed

on the camera press YES again -NEW MAG- to reset the control

panel to count down a full 200ft load.

If a short end is being used, press the DOWN key -SET FOOT- then

YES. Use the UP or DOWN key to set the counter to the desired

footage, press YES to validate.

Note: a magazine needs to be installed, locked in its running posi-

tion, for you to have access to the magazine footage setting.

Chapter 2 - The A-Minima Control Panel

Press again on the DOWN arrow if you want to recall or set mag B,

C or D

Note: a magazine needs to be installed, locked in its running posi-

tion, for you to have access to the magazine footage setting. The

camera does not take a physical reading of the film roll to determine

the footage reading or the magazine ID shown on the display. Both

must be set by the user.