Specifications

A-Minima Power Base

When used in conjunction with the A-minima camera body, the

Aaton small power base extends the camera functions.without com-

promising its size, weight and ease of use.

The power base is multi functional: as a tripod intermediary plate, it

accepts a standard 15mm or 19mm sliding bridgeplate for building

the camera system for studio work. This configuration can accept

Arri, Chrosziel or other manufacturer's mattebox, follow-focus and

support equipment designed for bridgeplate use.

A lighter configuration is also possible using the two 15mm Aaton

screw-in front rods attached to the power base by means of two 3/8"

threaded inserts located at the font of the base.

This configuration can also accept Arri, Chrosziel or other manufac-

turer's mattebox follow-focus and support equipment

The power base is also an electrical (fused) junction box between a

remote 12 volts power source, the camera body and various acces-

sories such as a zoom control or lens capping shutter.

Using its BNC connector, the power base allows you to automatical-

ly synchronize the camera to a source signal such as one delivered

by a computer/video monitor.

Finally a remote ON/OFF capability is offered when connecting an

Aaton wooden handgrip to the power base Lemo 2 socket.

Chapter 5 -

Accessories

1 - Lemo 6 accessories connector 4 - 3/8” camera screw

2 - Front rods 3/8” threaded insert 5 - Lemo 2 handgrip socket

3 - 3/8” threaded insert

1 - 5 Amps fuse holder 4 - BNC sync input

2 - Lemo 6 camera connector 5 - XLR4 battery cable connector

3 - Locating post