User`s guide

Wake-up and Switch Off the camera
To wake up the camera press the bLUE button
To Switch off the camera press the bLUE button during 5 sec. The display shows “Power
Off ??”. Press YES, the camera switches off.
Note : if left alone, the camera display will automaticaly shut off after 5 minutes.
Needless to say that every settings are being kept in the camera internal memory
Aminima default display
When first powered or after pressing the blue button, the display shows the camera
selected speed / timecode status and remaining footage
- If the Aatoncode has not been initialized, the display flashes between
A-Minima - Control Panel
22
and
and
24.000
200 ft
NO TIME
200 ft
24.000
200 ft
10:00:00
200 ft
Press on the "YES" button to remove the NO TIME message.
- If the aatoncode has been initialized in the camera, either from the aminima internal
clock or from an external source, the display flashes between
> 5s