User`s guide

to modify a specific speed, added to the preset speed list.
A-Minima allows you to modify or delete this speed. If you want to modify it, access the
speed menu, then choose "MODIFY" and select a new speed from the PRESET or NEW
SPEED menu. If you want to deleted it from your preset list, choose DELETE, then press
YES.
A-Minima - Control Panel
26
24.000
000 ft
MAG =
000 ft
NEW MAG
SET MAG
24.000
200 ft
24.000
000 ft
MAG =
000 ft
NEW MAG
SET FOOT
000 ft
33.333
200 ft
33.333
200 ft
SPEED =
33.333
PRESET
NEW SPD
MODIFY
DELETE
SPEED =
33.333
MODIFY
DELETE
REMOVE
33.333 ?
PRESET
REMOVED
Magazine footage setting
Second on the list, press the lower arrow twice, press YES to access the magazine
footage setting. With a fully loaded magazine installed on the camera press YES again
(NEW MAG) to reset the control panel to count down a full 200ft load.
If a short end is being used, press the lower arrow (SET MAG) then YES. Use the UP and
DOWN arrows to set the counter to the desired footage, press YES to valid.
Note: a magazine needs to be installed, locked in its running position, for you to have
access to the magazine footage setting.