User`s guide

ASA setting
Third on the list, the ASA must be adjusted to the exposure index of the film stock being
used. The ISO/ASA selector of the camera provides settings between 25 and 1000 ASA.
From the camera default display, press the lower arrow three times to access the ASA
setting menu, press YES, then use the UP or DOWN arrow to select the desired ASA.
Press YES to validate.
A-Minima - Control Panel
27
24.000
000 ft
ASA =
250
500 Set ASA
@ 250
24.000
200 ft
Note: for Aatoncode, proper ASA setting will insure that the timecode matrixes recorded
in between the film perforations will be exposed at an appropriate and useable level.
When using the external camera incident lightmeter, it simply insures that the T stop
indication shown on the display is the correct one for a particular film stock. When using
the lightmeter, please check the speed setting. The T stop indication takes the camera
speed into account.