User`s guide

A-Minima - Control Panel
38
Power
The current consumption of the A-Minima with
12 volts power supply ( 4 x 3 Volts batteries) is
from 0,45 to 0,7 Amps (at + 20°C and - 10°C
respectively). The voltage tolerance is from 10
to 14 V. In case of power overload or polarity
reversal, there is a fuse protection on the
battery holder. The four small 3 V batts drives
the camera for one hour @ 24 fps
(approximately 8-10 mags).
If the camera is not going to be used for a long
period of time or if the camera is powered
from the base plate (and the base plate clip-on
battery), it is recommended to remove the four
small 3 V batts.
If you are using an external power supply (12 V
batt) plugged on the Lemo 6 plug, remove the
4 x 3 Volts batteries and move the switch from
Batt. to Alim.Ext