User's Guide

Aaton Getting started
20
Warning messages
When a problem has been detected, the LCD screen’s background turns red
followed by an explanatory message.
Gate position
The camera gate is easily removable to allow switching between 2-Perf and
3-Perf formats. The correct positioning of the gate is mandatory for proper
camera functioning and focused pictures. The camera gate holder is
equipped with 4 sensors to check the gate position, if the gate is not proper-
ly positioned, the camera displays the message GATE MISPLACED and
refuses to run. Remove the gate and reinstall it.
Magazine upper lock lever
The magazine top locking lever, located on top of the camera body, insures
the magazine’s proper positioning. It is equipped with a position sensor
which does not allow the camera to run if this lever is unlocked, the message
MAG NOT LOCKED is displayed and the camera refuses to run. Lock the
lever and press RUN.