User's Guide

Aaton Camera body
39
Low battery alert
If Batt.1 or Batt.2 reaches the minimum preset level, e.g. Batt Alert = 14.4V,
an alert appears on both LCD screens and a red LED blinks in the camera
viewfinder.
The camera continues to run properly and LOW BATT is displayed in front of
the battery icon.
If both batteries are low, the alert is displayed on both the Assistant’s and
Operator’s screens.
Technical menu
The Technical Menu lets you access to:
LEMO mode, Video out, Syst Time, Batt Alert, LCD Param,
Ext Sync, Ftg Mode, Version, Lens Data, Video Capture,
Load Soft, SlowStart.
To access the Technical Menu press the «set» key then «tech».
Select one of the sub-menus and press the «right» key.
Select the mode by rotating the «jog» wheel, or pressing the «up» or «down»
key.
Low batt 1
Low batt 2
Low power
Low power (Operator’s)