User's Guide

Aaton Magazine
53
In the light again
15 Engage the take-up clutch knob by pulling its lever up.
16 Push the loop adjusting sprocket release button and hold it pressed.
Turn the take-up clutch knob clockwise (while gently pressing on it) to short-
en the loop size until the loop adjustment tool is held between the film and
the pressure plate.
NOTE: the loop adjustment tool makes a loop corresponding to approxi-
mately 37 visible perforations.
17 Once the loop has been set, check that the lower sprocket release but-
ton has returned to its up position.