Replacement Part List

17
19. Take all possible precautions when leaving the product unattended. Disengage
the power take-off, lower the attachments, shift into neutral, set the parking
brake, stop the engine and remove the key.
Maintenance and storage
1. Check shear bolts; engine-mounted bolt, etc., at frequent intervals for proper
tightness to be sure the product is in safe working condition.
2. Never store the product with fuel in the fuel tank inside a building where ignition
sources are present such as hot water and space heaters, clothes dryers, etc.
Allow the engine to cool before storing in any enclosure.
3. Always refer to owner’s guide instructions for important details if the product is
to be stored for an extended period.
4. Maintain or replace safety and instructions labels, as necessary.
5. Run the product a few minutes after throwing snow to prevent freeze-up of the
collector/impeller.
Additional warnings
1. If the product starts to vibrate abnormally, check it immediately. Excessive
vibration can cause injury.
2. Always ensure the product is fully assembled before using it. Never attempt to
use an incomplete product or one fitted with an unauthorised modification.
3. Do not overload the product.
Fuel handling
1. Follow the maintenance and repair instructions for this product. Never carry out
any modifications of the product. Never change the preset rotary speed or the
engine and product settings. Information about maintenance and repair is
provided in this user manual.
2. Never carelessly touch the product, you can burn yourself. While the product is
in operation or shortly thereafter, its parts such as the exhaust pipe, engine,
and other surfaces are extremely hot! Pay attention to the markings on the
product.
3. Make sure that the air intake of the combustion engine is clear. Keep the air
intake free of dust, dirt particles, gases and fumes.