Manualshelf

Replacement Part List

ManualsBrandsAavix ManualsOutdoors24 in. Self-Propelled Electric 208cc Gas Snow Blower
11121314151617181920
18
4. Make sure that air circulation is adequate and good. The product must be easily
accessible from all sides.
5. Always switch the product off and let it cool down, before refuelling it. Petrol is
highly flammable. Never smoke when you are refuelling the product. Do not
refuel the product, if there is an open fire in the vicinity!
6. Always use suitable aids such as funnels and filler necks. Do not spill any fuel
on the product or its exhaust system. There is a risk of ignition. However, if fuel
should be spilled, then you must remove it carefully from all parts of the product.
Any residue which may be present must be completely removed, before the
product is operated!
7. Exhaust gases and fuel fumes are noxious. Fuel fumes can ignite. Never use
the product in environments where there is a risk of explosion.
8. Never breathe in any fuel fumes, when you are refuelling the product. Never fill
the tank in enclosed spaces, such as basements or sheds. There is a risk of
poisoning and explosion!
9. Avoid skin contact with petrol.
10. Do not eat or drink, while you are refuelling the product. If you have swallowed
petrol or oil, or if petrol or oil has got into your eyes, then seek medical advice
immediately.
11. Close the tank lid immediately after filling the tank. Make sure that it is properly
closed.
12. Never use the product without an air filter.
13. Do use caution when handling fuel. To avoid any accidental fires, move the
product at least 3 metres (10’) from the fuelling point before starting the engine.
14. If fuel is ignited, put out the fire with a dry powder fire extinguisher.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use
low-vibration and low-noise operating modes as well as wear personal protective
equipment.
Take the following points into account to minimize the vibration and noise exposure
risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.