Replacement Part List

Assembly

WARNING! The product must be fully assembled before

operation! Do not use a product that is only partly assembled or

assembled with damaged parts!

Follow the assembly instructions step-by-step and use the

pictures provided as a visual guide to easily assemble the product

Disconnect the spark plug connector (35) from the spark plug!

NOTE: Take care of small parts that are removed during assembly

or when making adjustments. Keep them secure to avoid loss.

Always ask another person for assistance before assembling the

handle bar.

Handle bar

1. Check the connection of the drive wire (25) and auger wire (6) before

assembling the upper handle bar (23).

2. Loosen the pre-assembled knobs (21a) and the nuts (21d). Remove them with

the washers (21b) and bolts (21c) from the lower handle bar (19) (Fig. 2).