Replacement Part List

4. The discharge chute (8) can be adjusted approx. 180 degrees by rotating the

crank (28). Rotate the crank (28) clockwise to turn the discharge chute (8) to the

left; anticlockwise to turn the chute (8) to the right (Figs. 28, 29).

Fig. 28

Turn left

Fig. 29

Turn right

Auger control lever

The auger control lever (4) is located on upper side of the left handle (1). Squeeze

the lever to engage the auger. Release the lever to stop the snow throwing action

(Fig. 30).

NOTE: Also refer to auger control test prior to operating this

product.

WARNING! Be careful when squeezing the control lever – Danger

of crushing hand.

Fig. 30

Auger control test

４