Replacement Part List

Fig. 40, “ON” position

Fig. 41, “OFF” position

Ignition switch

1. Set the ignition switch (20) to “ON” position to start the product (Fig. 42).

2. Set the ignition switch (20) to “OFF” position to shut off the product (Fig. 43).

Fig. 42, “ON” position

Fig. 43, “OFF” position

Carburettor

If the auger fails to operate at operational speed the carburettor may need to be

adjusted. Please contact an authorised service centre or similar qualified specialist.

Skid shoe

The space between the scraper (12) and the ground can be adjusted by positioning

the skid shoes (13).

1. Slightly loosen the nuts (13c) and adjust the skid shoes (13) in required position.