Replacement Part List

61
Removing blockages
WARNING! Wear protective gloves when removing blockages! Use
proper tools to remove debris, e. g. a wooden stick! Never use
your bare hands!
Warning! Rotating working tool, keep hands away! Do not insert
your hands into the discharge chute.
1. Check the discharge chute (8) for blockages and use the shovel (9) to remove
any.
2. Check the auger (11) and remove possible clogging with the shovel (9), brush or
blunt tool. Check to make sure the auger is in an undamaged condition. Contact
an authorised service centre if parts are damaged and a replacement is
necessary.
Auger
WARNING! Wear protective gloves when working on the auger
to avoid injuries!
WARNING! Wait until all moving parts have come to a
complete stop before touching them. Auger continues to
rotate after the product is switched off.
1. Remove snow from the auger (11) after use using a proper brush or tool.
2. Check for any damage and wear. Have the auger replaced by a qualified
specialist if it is bent, damaged or worn. Otherwise the performance and safety
of the product cannot be guaranteed.
Auger shaft (Gear box)