Replacement Part List

62
Remove the shear pins (11b) and nuts (11c) on the auger shaft (11a). Spray
lubricant inside the shaft and lubricate the auger bearings at least once a season
(Fig. 51).
1.
Unscrew the oil drain bolt (11e) underneath the gear box (11f).
2. Add freezing lubricating grease through opening of the grease adding bolt
(11d) with an oil gun (not provided).
3. When the grease comes out of the place of oil drain hole underneath the
gear box (11f), clean and dry the place and tighten the oil drain bolt (11e).
4. Clean and dry the place of grease adding bolt (11d)
5. Do this operation at least once a year.
Fig. 51
Skid shoe
Replace worn skid shoes (13) always in a pair.
1. Loosen the nuts (13c) and remove them together with the bolts (13a), washers
(13b) and skid shoes (13) on both upper sides of the guard (10).
2. Secure new skid shoes to the guard (10). Ensure the scraper plate is correctly
aligned to the hole in the guard.
11d
11f
11e