Replacement Part List

1. Unscrew the nut (11c) from the broken shear pin (11b) and remove them from

the auger shaft (11a).

2. Place a new shear pin (11b) through the hole in the auger shaft (11a) and

tighten it with the nut (11c) (Fig. 56).

Fig. 56

Wheels

1. Check the wheels (17) for pressure before every operation. Pump up the wheels

with a proper tyre pump if necessary. Observe the max. allowed pressure

marked on the wheels.

2. If the wheels (17) are damaged or worn replace them with a new one of the

same type.

Engine oil

NOTE: Check the oil level and quality before each use and after

every five hours of operation to be sure correct oil level is

maintained.

11b

11c

11a