aaxa TECHNOLOGIES User Guide
Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces.
Table of Contents Chapter 1: P300 Neo at a Glance P300 Neo Introduction Remote & Touchpad Accessories Chapter 2: Getting Started Powering On / Off Focus Adjustment / Throw Distance External Inputs/Outputs Connecting to a Computer VGA Connecting to a Digital Input Connecting to Composite Video Connecting to Digital Input Video Connecting to Speakers or Headphones 1 2 3 4 5 6 7 9 11 13 15 Connecting a TF Card Connecting a USB Stick Chapter 3: Menu Screens Main Menu Video Player Menu Photo Viewer Menu Music
P300 Neo at a Glance Chapter 1 Main Unit Front/Back Touchpad Focus Adjustment DC Port Headphone Out AV Port Power Switch Mini-VGA Port TF Card Slot USB Port Digital Input Port Note: Boost Mode can only be used for 1 hour.
Remote & Touchpad Power On/Off > Source Menu > Home Main Menu Navigation Volume Up Volume Down > > ||||| Media Player Menu Navigation Back OK Menu Exit/Back Remote Both the touchpad and remote can be used to navigate through the menus. The Main Menu Navigation on the remote functions exactly the same as the directional pad on the P300 Neo unit. NOTE: Pressing power on the remote will only put the projector in STANDBY mode.
Accessories A/V Cable Remote VGA Cable (sold separately) Power Adapter Tripod Note: VGA Adapter Cable sold separately *Under various circumstances, the actual accessories may be different from those shown in the pictures above. Additional accessories are available for purchase at www.aaxatech.
Getting Started Chapter 2 Powering ON the projector 1. 2. 3. Connect the power cord to the P300 Neo. Connect the other end of the power cord into the wall power source. Toggle the On / Off switch on the side of the projector to the “ON” position -- the projector should automatically turn on. Powering OFF the projector 1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will fully turn off the projector.
Focus Adjusment / Throw Distance Focus Adjustment • Spin the focus wheel up or down until the image becomes clear. Throw Distance Chart Throw Distance Units: Inches 19 29 38 48 57 67 76 86 Diagonal Size Units: Inches 20 30 40 50 60 70 80 90 DIA GO NA LS CR EE NS IZE 16:9 Aspect Ratio Throw Ratio 1.
External Inputs and Outputs Mini-VGA TF Card Headphones/speakers Composite Cable Digital Input USB Stick 6
Connecting to a Computer via VGA Step 1: Connect one end of the VGA Cable to your computer’s VGA Adapter. Step 2: Connect the other end of the VGA Cable to your P300 Neo’s VGA port. Step 3: In the Main Menu, select the “Inputs” icon and then the “VGA” Icon.
Connecting to a Computer Cont. Step 4: Enabling VGA on your Computer – To enable VGA output on your computer, most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable VGA output. Below are standard instructions for a Windows 10 computer – not all systems are the same. Step 5: Press Windows+P to toggle through display settings.
Connecting to a Computer via Digital Input Step 1: Connect one end of the Digital Input Cable to your computer’s Digital Input Adapter. Step 2: Connect the other end of the Digital Input Cable to your P300 Neo’s Digital Input port. Step 3: In the Main Menu, select the “Inputs” icon and then the “Digital Input” Icon.
Connecting to a Computer Cont. Step 4: Enabling Digital Video output on your Computer – To enable Digital Video output on your computer most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable Digital Video output. Below are standard instructions for a Windows 10 computer – not all systems are the same. Step 5: Press Windows+P to toggle through display settings.
Connecting to Composite Video Step 1: Connect the 3.5mm Composite AV Cable to the back of the P300 Neo. Step 2: Connect the composite end of the AV Cable (Red, White,Yellow) to your device.
Connecting to Composite Video Cont. Step 3: In the Main Menu Select “INPUT” icon Step 4: Select “RCA” Turn on your multimedia device. Connectivity with multimedia devices The P300 Neo can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game consoles and other peripherals with ease. *Some smartphones require video out capabilities to be displayed with the P300 Neo. Check with your phone manufacturer.
Connecting to Digital Video Input Step 1: Connect one end of the Digital Input cable to your P300 Neo’s Digital Video Input Adapter. Step 2: Connect the opposite end of the Digital Video Input cable to your device.
Connecting to Digital Video Input Cont. Step 3: In the Main Menu Select “INPUT” icon Select “DIGITAL INPUT” Icon Step 4: Turn on your multimedia device. If available, select 1280x720. Connectivity with multimedia devices The P300 Neo can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game consoles and other peripherals with ease. *Some smartphones require video out capabilities to be displayed with the P300 Neo.
Connecting Speakers / Headphones Step 1: Connect your speakers/headphones to the projector’s audio port. Step 2: Ensure that the projector and/or the headphones are powered on. Step 3: Place the headphones on and enjoy! *CAUTION: Prolonged use of headphones at a high volume may impair hearing.
TF Card How to insert your TF Card • Slide in your TF card into the TF card slot on the side of the P300 Neo (facing down as shown in picture). • Gently slide the TF card until it clicks into place. How to access your TF Card • Once your TF Card has been inserted, you can navigate to any media content category in the main menu. • After selecting the media content category, choose the TF card selection.
TF Card Cont. Media Player menu • In the main menu select the type of file you wish to play. • File Menu System • The P300 Neo will show all folders and files you have on your TF Card in the C: drive. • Use the touchpad to navigate to different folders or files. Select the TF Card icon to acess your files.
USB Drive How to insert your USB Drive • Slide your USB Drive into the USB port (as shown in picture). • Gently slide the drive until it cannot go in any further. How to access your USB Drive • Insert your USB Drive into the projector. • Use the navigation pad to choose the USB Drive icon from the main menu to access your files. • Choose your desired file. *Review the “Specifications” section of this manual to read about the supported file formats.
USB Drive Cont. Media Player menu • In the main menu select the type of file you wish to play. • File Menu System • The P300 Neo will show all folders and files you have on your USB Drive in the C: drive • Use the touchpad to navigate to different folders or files. Select the USB Drive icon to access your files.
TF Card and USB Drive • If both TF Card and USB Drive are inserted, depending on which one inserted first, the first one will show in the C: drive and the second one will show in the D: drive.
Chapter 3 Menu Screens Main Menu > The P300 Neo features a built in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text directly from your connected devices. > • • • • • > > ||||| Menu OK Exit/Back Press the left and right directional buttons to choose an icon from the main menu. To select a menu option, press the “OK” button in the middle of the navigation pad. To go back to the previous screen, press the “Back” button.
Video Player Menu Opening a file: • Select the “Video” icon (Fig. 3.1). • From the submenu (Fig. 3.2), select the storage media with the stored files. • Choose which file you wish to play. Fig. 3.1 Fig. 3.2 The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.2 assumes both USB and TF Card are inserted). Previewing Files: • Press the directional keys to highlight the item of interest. • Wait 2-3 seconds and a preview of the video will show on the screen.
Video Player Menu > While Playing Videos While playing videos, the volume is adjustable. Further controls are available in the video player submenu - which is accessed through the “OK” button. OK > Volume Down Positive Keystone Adjustment Volume Up Negative Keystone Adjustment > OK Enter Video Player Submenu • To open/hide the video playback menu, use the “OK” and “Back” Buttons on the projector.
Video Player Submenu > Playing Videos The Video Player Submenu can be accessed by pressing “OK” during video playback. To exit the Video Player Submenu, press the “Back” button or wait 5 seconds. To navigate the Playback Menu, use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig. 3.3). OK > Volume Down Positive Keystone Adjustment Volume Up Negative Keystone Adjustment > OK Confirm selection Fig. 3.3 00:00:59 / 00:04:20 Pause FB FF Prev.
Video Playback FAQ How do I loop a video? 1. Choose either USB or TF Card for playback 2. 3. 4. 5. How do I preview a video? 1. Choose the “Videos” icon from the main menu. 2. Navigate using either remote or onboard buttons to the file you wish to preview. 3. Highlight the file. *Do not select Navigate the folders until you the file, just highlight it. reach the file you wish to play. 4. Wait 3-4 seconds. Highlight the file you want to 5. A preview screen will pop up on play, then confirm the selection.
Photo Menu Opening a File: • Select the “Photos” icon from the main menu (Fig. 3.4). • From the submenu (Fig. 3.5), select the storage media with the stored files. • Choose which file you wish to play. Fig. 3.4 Fig. 3.5 The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted). Previewing Files: • Press the directional keys to highlight the desired file.
Photo Menu > While Viewing Pictures While viewing pictures, further controls are available in the Photo Submenu which is accessed through the “OK” button. OK > Previous Picture Positive Keystone Adjustment Next Picture Negative Keystone Adjustment > OK Enter Photo Player Submenu • To open/hide the Photo Playback menu, use the “OK” and “Back” Buttons on the projector.
Photo Submenu > Viewing Pictures: The Photo Submenu can be accessed by pressing “OK” during picture slide-show playback. To exit the Photo Submenu, press the “Back” button or wait 5 seconds. To navigate the playback menu, use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig 3.6). OK > Previous Picture Positive Keystone Adjustment Next Picture Negative Keystone Adjustment > OK Confirm selection Fig 3.6 00:00:59 / 00:04:20 Pause Prev.
Photo Slideshow FAQ How do I play a slideshow? 1. Choose either USB or TF Card for playback 2. Navigate to the folder that contains the pictures you wish to view in the slideshow. 3. Confirm selection of the first picture. 4. Press “Play” in the photo menu 5. Slideshow will now play. 6. NOTE: Selecting “Repeat A” will loop slideshow. How do I manually control the slideshow? 1. After selecting the photo you wish to be displayed, you can press “Play” to start the slideshow (as outlined in the previous FAQ).
Music Player Menu Opening a File: • Select the “Music” icon (Fig. 3.7). • From the Submenu (Fig. 3.8), select the storage media with the stored files. • Choose which file you wish to play. Fig. 3.7 Fig. 3.8 The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted). Previewing Files: • Press the directional keys to highlight the desired file. • Wait 2-3 seconds and a preview of the audio will show on the screen.
Music Player Menu Listening to Audio: To adjust the volume, use the left and right button on the projector or the volume keys on the remote. To navigate the playback menu, push the “OK” button to open the menu and use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig 3.9). > To open/hide the music playerback menu, use the “OK” and “Back” button on the projector.
Music Playback FAQ How do I loop a song? 1. Choose either USB or TF Card for playback How do I create a song playlist? 1. 2. 3. 2. Navigate the folders until you reach the file you wish to play. 3. Highlight the file you want to play, then confirm the selection. 4. Move selection on music player menu to “Repeat 1,” and confirm the selection. 5. The song will now loop after playback is finished. 4. 5. 6. 7. 8. Insert your media device (either TF card or USB) into computer.
E-Book Viewer Menu Opening a File: • Select where the files are located from the main menu. • Select the “Text” icon (Fig. 3.10) • Choose the file you wish to play. Fig. 3.10 The P300 Neo will show all folders and files you have on your USB or TF Card Drives. Viewing Text Files: The P300 Neo Micro Projector allows you to view text files. Select the file you want to view in the file menu for the particular storage device on which the file is stored.
Chapter 4 Setup Menu The Settings Menu can be accessed by selecting “Setting” on the Main Menu Picture • • • • • Picture Mode Color Mode Aspect Ratio Brightness Mode Projection • • • Sound Mode Balance Auto Volume • • Sleep Timer Auto Sleep • • OSD Language Restore Factory Default Sound Within the settings menu, there are four more submenus that allow you to customize your P300 Neo to the settings you want.
Picture Settings Picture Mode • Changes the picture mode to different settings depending on your usage Color Mode • Adjusts the color temperature from warm to cool (red to blue) Aspect Ratio • Changes the aspect ratio of the picture - Auto, 4:3, 16:9*, etc.
Sound Settings Sound Mode • Changes the sound mode depending on what is currently playing Balance • Adjusts the sound balance manually Auto Volume • With the Auto Volume On, the video can be opened with volume automatically 36
Time Settings Sleep Timer • Sets when projector goes to sleep Auto Sleep • Sets auto sleep function where projector will turn off when not in use or if there is no signal.
Option Settings OSD Language • Changes the language of the device.
Keystone Adjustments What is Keystoning? “Keystoning” occurs when a projector is aligned non-perpendicularly to a screen, or when the projection screen has an angled surface. The image that results from one of these misalignments will look trapezoidal rather than square. Digital Keystone Adjustments By adding a special, selectable algorithm to the scaling, some new projectors are able to alter the image before it reaches the projection lens. The result is a squared image, even at an angle.
Keystone Adjustments FAQ How to Correct Keystone • If the image looks trapezoidal with the base larger (as pictured right), press the bottom button on the directional pad on the top of the P300 Neo until the keystone effect corrects and the picture turns into a square projection. • If the image looks trapezoidal with the top larger (as pictured right), press the top button on the directional pad on the top of the P300 Neo until the keystone effect corrects and the picture turns into a square projection.
Chapter 5 Technical Details Troubleshooting IMAGE IS BLURRED Possible Causes Solution The Projector is not in focus Adjust the focus with the focus adjustment dial until the image comes into focus The Projector is offset from plane / angle of operation Move the projector so that it is both 180 degrees and on an evern plane with the screen. Or it can be adjusted by keystone settings NO SYNC, NO SIGNAL 1. Be sure to setup the computer to enable a video signal output.
Technical Details Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes Solution There is no power Check to ensure the power outlet source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector.
Specifications Brightness: Native Resolution: Max Resolution: Battery Runtime: Contrast Ratio: Aspect Ratio: Projection Lens: Image Size: Lamp: Video in: Audio Output: TF Card: USB: Dimensions: Weight: Supported File Formats: 420 Lumens 1280x720 (720p) 1920x1080 (1080P) 150 Minutes (Eco Mode) 1000:1 16:9 Manual Focus 10~120 inches Triple RGB LEDs with Vibrant Color Technology Life 30,000hrs Composite A/V Mini-VGA Digital Input (Compatible with Full Size HDMI™) 3.
Notes 44
Please direct all customer service inquiries to: AAXA Technologies, Inc. 17691 Mitchell N., Unit #B Irvine, CA 92614 (714) 957-1999 info@aaxatech.
