Manualshelf

User Manual

ManualsBrandsAAXA Technologies ManualsElectronicsFull HD Micro LED Projector with Built-in Battery - Native 1920 x 1080p FHD Resolution, 1200 Lumens, 30,000 Hour LEDs, Onboard Media Player, Business/Home Theater Use
31323334353637383940
Table Of Contents
Technical Details
34
Chapter 4
IMAGE IS BLURRED
Possible Causes Solution
The Projector is not in focus Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an even plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output. On some
laptops this is done by pressing and holding Function + F5 key. If using the
LED Pico as an external monitor on Windows based systems, this can be
done by selecting “extend my desktop to this monitor.” The native resolu-
tion of the LED Pico projector is 1280x720 (720p). Depending on the
video driver, different resolutions may need to be selected for proper
output.