User Manual

Table Of Contents
Technical Details
35
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power
Check to ensure the power outlet source is good.
Check the Power Adapter/ Micro USB Cable to
ensure a proper connection with the wall outlet or
computer as well as the projector. Ensure the
projector is off while charging.
The power button was not held long enough
To power on the projector, the power button
needs to be depressed for a full 3 seconds. Try
holding the power button until the optical engine
turns on.
Troubleshooting
Low battery
Charge the projector until the battery is fully
charged (Green light can be seen). Projector has
to be turned off while charging.