User Manual

Technical Details
36
Troubleshooting
PROJECTOR SHUTS OFF WHILE IN USE
Possible Causes Solution
Incorrect power output used
For continuous operation, a USB Charger with
5V/2A output is required. Laptop USB ports or
USB chargers with less than 2 Amp rating can
be only used to charge the battery.
Low Battery Charge the projector until the battery is fully
charged (Green light can be seen). Projector has
to be turned off while charging,
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly connected or
selected
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu.
Incorrect le extension / Video is encoded with
incorrect codec
Please refer to “Specications” page to see which
le types and codecs are supported. Verify that
the le was encoded properly.