Manualshelf

User Manual

ManualsBrandsAAXA Technologies ManualsElectronicsFull HD Micro LED Projector with Built-in Battery - Native 1920 x 1080p FHD Resolution, 1200 Lumens, 30,000 Hour LEDs, Onboard Media Player, Business/Home Theater Use
12345678910
Table Of Contents
Getting Started
1. If you want to charge your LED Pico, simply plug in the Micro USB cable to any
computer or wall adapter.
2. Once your LED Pico is charged, hold down the power button for approximately three
seconds until the unit starts projecting.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and the power button once, then again to conrm.
2. After a few seconds, the unit should turn off fully.
Note:
*The LED Pico Projector battery does not charge when it is in operation.
*For continuous operation, a USB charger with 5V/2A output is required. Laptop USB ports
and USB chargers with less than 2 Amp rating can be only used to charge the battery.