User Manual

Getting Started

1. Connect the power cord to the P3.

2. Connect the wall plug into the wall power source.

3. Press POWER button and hold for 2-3 seconds to switch on or switch off

the power.

4. The projector will boot with a boot screen and nish booting to the media

player’s Main Menu.

5. If the projector does not boot to the “Main Menu” Press “SRC”, select “Me-

dia” to start the Media Player

• 4 hours of charge time is required to reach a full charge.

• When charging, the inside of the P3 will glow red.

• When fully charged, the inside of the P3 will turn blue.

Powering ON the projector

Chapter 2

Powering OFF the projector

1. Press and hold the power button for 3 seconds.

2. The optical engine should power off and the fan should stop spinning.

Note: The P3 Projector battery does not charge when it is in operation.