Data Sheet
General Note This datasheet does not give any information on product availability. The information given is just meant to describe the
product and is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the
interest of further technical development.
Copyright: AB Elektronik GmbH (GER) ▪ info@abelektronik.de ▪ www.abelektronik.com
09/2017
Page 1 / 1
Cermet preset potentiometers
Technical data
Resistance value and tolerance
100 Ω – 1 MΩ ± 20 %
Stopper strength
1.0 K gf-cm
Taper
lin
Operation life
100 cycle resistance value ±
10 %
Power rating
0.5 W / 70 °C
Temperature characteristics
3 % @ 70 °C 5HR
Max. working voltage
250 V
Temperature coefficient
+ 150 ppm / °C
Residual resistance
10 Ω @ R ± 1 K Ω, 1%@ R 1 K Ω
Resistance to soldering heat
260 °C 5 sec.
Mech. rotation angle
260 ± 20 °
Working temperature
- 40 °C – + 125°C
Typ TGN 805 M
Basic design: width 9 mm